標題：觸摸屏

產品概述

1.1 產品拓撲圖

1.3 Product topology

1.3.1搭配ATC450-C方案

1.3.1 With ATC450-C scheme

1.3.2搭配ATC600方案

1.3.2 With ATC600 scheme

1.2 產品安裝

1.4 Product Installation

1.4.1 觸摸屏安裝方法

1.4.1 Installation method of touch screen

ATP系列無線測溫系統使用的觸摸屏采用面板嵌入式安裝，產品尺寸及安裝開孔尺寸如圖1.1、圖1.2所示。安裝方法見圖1.3。

Touch screen ATP series wireless temperature measurement system uses panel embedded installation. The product size and installation hole size are shown in Figure 1.1 and Figure 1.2. The installation method is shown in Figure 1.3

圖1.1 ATP007觸摸屏開孔尺寸（單位mm）

Figure 1.1 hole size of atp007 touch screen (unit: mm)

圖1.2 ATP010觸摸屏開孔尺寸（單位mm）

Figure 1.2 hole size of atp010 touch screen (unit: mm)

圖1.3 觸摸屏安裝方法

Figure 1.3 installation method of touch screen

1.4.2 無線溫度收發器的安裝

1.4.2 Installation of wireless temperature transceiver

無線測溫收發器，可以采用導軌（DIN35mm）安裝方式，也可以使用螺栓固定方式，如圖1.4、圖1.5所示。

The wireless temperature measurement transceiver can be installed by guide rail (din35mm) or bolt fixing method, as shown in Figure 1.4 and Figure 1.5.

圖1.4  ATC450-C無線溫度收發器外形及安裝示例

Figure 1.4 appearance and installation example of wireless temperature transceiver

圖1.5 ATC600無線溫度收發器外形及安裝示例

Figure 1.5 appearance and installation example of wireless temperature transceiver

1.4.3 無線溫度傳感器的安裝

1.4.3 Installation of wireless temperature sensor

無線溫度傳感器共有多種型號，分別對應磁吸固定、螺栓固定、表帶固定、合金片固定等安裝方式。

Wireless temperature sensor has a variety of models,part are magnetic absorption fixation, bolt fixation, strap fixation, alloy plate fixation and other installation method.

圖1.6 表帶式無線溫度傳感器ATE200/200P 

Figure 1.6 Belt wireless temperature sensor ATE200/ATE200P

圖1.7 磁吸式無線溫度傳感器ATE100M        圖1.8螺栓式無線溫度傳感器ATE100/100P

Figure 1.7 Magnetic wireless temperature sensor ATE100M  Figure 1.8 Bolted wireless temperature sensor ATE100/100P

圖1.9 無源無線溫度傳感器ATE400

Figure 1.9 passive wireless temperature sensor ATE400